DIN 988 shim ring, 7x13
Size drawing - 7x13 values on the views - h = 1 shown (the thickest file) - enlarged 5:1
Dimension
7.115 7.04-7.19
Bore, D12 (band middle)
12.86
D Outside, d12 (band middle! d2 = 12.86 Y d 12.77-12.95
12.77-12.95 T
6.3 mm thickness, a file each e 6.5 mm e 1 mm e
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). d1=7.115 L1 = two or more independent sources agree: the release gate. 7.04-7:19 LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 2.
Notes
d1 and d2: the middle of the D12 / d12 band; grey = the band's limits (ISO 286-2).
h: nominal = max; @ = a file at that thickness. Sharp edges: house conventions, D02.
d2 = 12.86 12.77-12.95
View from above
TITLE
'? CommunityCAD Size drawing, 7x13
STANDARDS FOLLOWED FAMILY / DETAIL DIN 988:1990-03 (as tabulated) - ISO 286-2 (D12, d12) Shim ring - 7x13
SHEET REV SCALE PROJECTION UNITS
CC-DIN988-SZ-7x13 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE 091135b88172de29a46c1a2ac9916F747F26acf7 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.