EN 10219 CHS circular steel hollow section, 76.1x3
Size drawing - 76.1x3 values on the views - enlarged 2:1
Dimension
Outside diameter
Wall thickness
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L1 2.
TITLE
'? CommunityCAD Size drawing, 76.1x3
STANDARDS FOLLOWED
EN 10219-2 (through free tables)
FAMILY / DETAIL
Circular steel hollow section - 76.1x3
SHEET
CC-EN10219-CHS-SZ-76.1x3 A 2:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
1fa02885ed33ccOe2d8b2F73686ba418650b8d17 CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.