DC radial blower, scroll housing, 7530
Size drawing - 7530 values on the views - scale 1:1
Sym. Dimensi
Overall length
Overall width
Thickness
Axis to outlet face
yo Axis to straight wall
x1 Hole 1 along, from the axis
y1 Hole 1 across, from the axis
x2 Hole 2 along, from the axis
y2 Hole 2 across, from the axis
dh Hole diameter
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L110.
Notes
No published standard: values are reconciled from makers' drawings (ADR 0034). Mounting holes run through t.
Housing curve, ears, outlet opening and impeller are illustrative: sheet DO2.
TITLE
'? CommunityCAD Size drawing, 7530
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard (makers' drawings) DC radial blower - 7530
SHEET REV SCALE PROJECTION UNITS CC-DCBLOWER-SZ-7530 A 1:1 € Dimensions in mm SPEC VERSION LICENSE PAGE aéebc7dae7b620Fd2487b4d313F49ae74ad0d1F4 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.