ISO 2795 sintered bronze bush, cylindrical, 6x9
Size drawing - 6x9 values on the views - L = 6 shown; lengths 4, 6, 10 - enlarged 5:1
6x9
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. L=6 shown This size's values: L2 3-111. Notes Sizes are d x D: normal and thin-wall series side by side, as in Table 1. L: the size's lengths in Table 1, each its own file; the views show the middle one. C is within the owner's quarter-wall cap at every size here, so it is modeled as given.
C <0.3,a = 45°
View from above
TITLE
'? CommunityCAD Size drawing, 6x9
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 2795:2020 Sintered bronze bush, cylindrical - 6x9 SHEET REV SCALE PROJECTION UNITS CC-1802795-SZ-6x9 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE
70b2bf787ea8F07904ce030af50bcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.