DIN 6885 parallel key, forms A, B and AB, 6 x 6
Size drawing - 6 x 6 values on the views - | = 32 shown - enlarged 2:1
Sym. | Dimensio 6x6
5.985 5.97-6
Width (h9)
5.985 s = 0.325 (45° every edge) HEIR, 5.97-6 0.25-0.40
Edge chamfer 8.525
h = 5.985 0.25-0.40 5.97-6 Graftca meterranse| reference) 17-22
Side view, form A
| = 32 shown = Shaft keyway depth (reference) lengths 14-70 ,
Hub keyway depth (reference)
Round end radius (b/2), forms A and AB
Form A: two round ends Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. | < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. Form B: two square ends LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L16. Notes b and h at their h9 bands' midpoints, the nominal naming the band's top (ADR 0014). s at its range's midpoint, a 45° chamfer on every edge (house convention). Form AB: one round end, one square end Shaft: over the first value, up to and including the second. Not modeled. tl, t2: the keyway the key fits, shown for your keyway design. Not modeled.
TITLE
'? CommunityCAD Size drawing, 6 x 6
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 6885-1:2021-11 Parallel key - forms A, B, AB: 6 x6 SHEET REV SCALE PROJECTION UNITS CC-DIN6885-SZ-6x6 A 2:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE 1fa02885ed33ccOe2d8b2F73686ba418650b8d17 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.