ISO 2795 sintered bronze bush, flanged, 6x10x14x2
Size drawing - 6x10x14x2 values on the views - L = 10 shown; lengths 6, 10, 16 - enlarged 5:1
6x10x14x2 45* |S 0.8% 0.5 0.5 6, 10, 16
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 4 - LO 3. Notes L =10 shown rf = 0.5 house Sizes are d x D x Dfl x e. L is the overall length, flange included. lengths 6-16 L: lengths both makers list, each its own file; the views show the middle one. C andr: SELFOIL's drawing maxima. c and rf: what's modeled, capped at wall / 4 (house).
c = 0.5 house, a = 45°*
Dfl = 14
TITLE
View from above '? CommunityCAD Size drawing, 6x10x14x2
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 2795:2020 Sintered bronze bush, flanged - 6x10x14x2 SHEET REV SCALE PROJECTION UNITS CC-1S802795F-SZ-6x10x14x2 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE 70b2bf787ea8F07904ce030af50bcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.