* CC-SLA-DS-6V12Ah rev A '?) CommunityCAD Size datasheet -6V12Ah
SLA 6V12Ah battery
Size datasheet: this size's values with their levels, conventions and sources.
Part key sla-batteries-6v12ah Files 1 STEP AP214 (simplified) 6V12Ah, front view, 1:5 6V12Ah, view from above, 1:5 Sym. Dimensi Value Level l Case length (Yuasa, CSB) 151.0 1-2 w Case width (Yuasa, CSB) 50.0 La - 2 h Overall height (largest stated) 100.5 1-2 he Container height, lid top (CSB fig.) 94.3% Lo - 1 x Case end to the tab's shoulder (CSB fig.) 14.1* lo- 41 xf Case end to the lug plate's face (CSB fig.) = 2 y Near long face to the centreline (CSB fig.) 9.5% lo. 1 ye Near long face to the lower edge (CSB fig.) - 2 yc Far long face to the lug's centre (CSB fig.) - - p Terminal centre to centre (CSB fig.) - - bt F2 tab width (Yuasa, CSB fig.) 6.35 l1- 2 tL F2 tab length (CSB fig.) 7.95% lo - 1 tt F2 tab thickness (CSB fig.) 0.8* lo. 1 te F2 shoulder to hole centre (CSB fig.) 3.4% Lo - 1 lw B1 lug width (CSB fig.) - - lt B1 lug thickness (CSB fig.) ° - ld B1 lug hole (M5 bolt, CSB fig.) - - le B1 lug top to hole centre (CSB fig.) - - lh B1 lug top above the base (CSB fig.) - - xp + terminal centre, x (computed) 61.4 computed yp + terminal centre, y (computed) 15.5 computed xn - terminal centre, x (computed) -61.4 computed yn - terminal centre, y (computed) 15.5 computed b Lid band, h_case / 8 (house) 11.788 house f Pocket floor height (house) 90.562 house
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given, modeled at it. * amber: one source (LO). house: a stated house rule. Level - independent sources.
No published standard; Yuasa and CSB data sheets Page 1/2 SLA battery - 6V12Ah : Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 9325b178989ac5d161502b81caa4f9ee4cfda308
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
* CC-SLA-DS-6V12Ah rev A '?) CommunityCAD Size datasheet -6V12Ah
Conventions
« Case and heights: No published standard. | and w are the makers' nominals, within their stated tolerance. h is the largest stated, to the block's top: the terminal's, but at 12V18Ah the lid's, as CSB's leaders go (owner), the lug's top Ih below the rim. hc the lid top. Bottom face at z = 0,1 along X, w along Y, terminals toward +Z.
« Terminal positions: As CSB's top views put them. y runs to the centreline; ye to the terminal's lower edge, so the centre is ye plus half its width. xf runs to the lug plate's end-side face. Undimensioned far terminals follow the drawing's symmetry. + on +X at the two-end sizes; 6V12Ah's drawing is turned about Z for it.
« Terminals: F2 Faston tab at every Faston size (owner), shown upright, pending the owner; 12V18Ah has CSB's B11 flat lug, a through hole at its drawn size, for an M5 bolt.
« Lid band, pockets, signs: Illustrative. A lid band h_case / 8 high, the body slightly inset under it; a rectangular pocket around each terminal; the tab's narrower root; a red + inlaid flush and a - recessed beside the terminals. Other edges sharp.
e Label panel and finish: Illustrative. A recessed panel on the +Y face with the CommunityCAD mark inlaid flush. No vents, handles or maker text. Black ABS, tinned terminals: render only.
Sources Source Publisher Retrieved sha256 yuasa-np12-6 GS Yuasa (yuasa.com UK data sheet service) 2026-11-04 aéb80cb178bd csb-gp6120 CSB Battery 2026-11-04 e8148b581772 csb-gp645-figures CSB Battery 2026-11-04 8e4711fdfb3b csb-gp6120-figures CSB Battery 2026-11-04 e8148b581772
The whole series (verification map, drawings): CC-SLA-DS.
No published standard; Yuasa and CSB data sheets Page 2/2 SLA battery - 6V12Ah : Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 9325b178989ac5d161502b81caa4f9ee4cfda308
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.