CC-1S015-DS-6202 revA Size datasheet - 6202
'?) CommunityCAD
ISO 15 6202 deep groove ball bearing
Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts.
For 15 mm shafts Part keys iso15-6202, iso15-6202-2z,
iso15-6202-2rs Files 3 STEP AP214 (simplified):
open, 2Z, 2RS 6202 -22Z, front view, 1:1 6202-2Z, view from above, 0.5:1 Sym. Dimension Value Level d Bore diameter 15 L1- 3 D Outside diameter 35 Ll - 3 B Width 11 L1- 3 r Chamfer dimension r_s min > 0.6 L1- 3
Modeled value: nominal, else the midpoint of min-max. =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 15 (edition not printed by the sources) Page 1/2 Deep groove ball bearing - 6202 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 6aab1ad286d2ad639684ae08e37affb4700Ffd8f
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
* CC-1S015-DS-6202 revA '?) CommunityCAD Size datasheet - 6202
Conventions
e Rings and corners: Bore d, outside diameter D and width B at their nominals; the rings concentric, their faces flush. The eight ring corners are
quarter-rounds of r_s min, the smallest the standard allows; the shape isn't specified.
« Ring faces: Each ring's face is (D - d)/8 wide; the annulus between them is the middle half of the radial section.
« Shield and seal (2Z, 2RS): A flat annulus recessed r_s min / 2 below the ring faces, the same for both: no groove, snap wire or lip.
« Open bearing: The annulus recessed B/4 per face, leaving a solid web between the rings. Balls, cage and raceways are not modeled.
« Values: d, D and B at their nominals; r at r_s min, the only limit the sources give.
« Markings and grades: No markings. Tolerance class, internal clearance and lubricant are not geometry: one model per bearing and product.
Sources
Source Publisher Retrieved sha256
nsk-dgbb NSK 2026-10-26 ef9d54e1ca7F
ntn-bearingfinder-dgbb NTN Americas 2026-10-26 2b57833fe316
skf-17000-dgbb SKF 2026-10-26 65e0919bee24 (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-ISO15-DS.
ISO 15 (edition not printed by the sources) Page 2/2 Deep groove ball bearing - 6202 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 6aab1ad286d2ad639684ae08e37affb4700Ffd8f
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.