30 B-type slot 8 aluminium extrusion, per Misumi HFS6, 60x60
Size drawing - 60x60 values on the views - enlarged 2:1
Source levels Sym. | Dimension (mi Main value = the modeled value (nominal, else the middle of min-max). Profile width Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and Slot undercut width marked *
Profile height
Slot pitch (cell side)
r = 2* (4 corners) Slot opening
c = a source value was corrected; the
w = 2h (diagonal web) Lip thickness datasheet says how.
House convention = a detail no source
@ d = 6.8* (each core) Cavity depth behind the lip Tree hts top house rule.
Notes
L1 here = Misumi and Motedis agree; value =
the maker's drawn nominal.
* = Misumi HFS6's drawing alone (as #958 item
1A).
Core bore diameter . s grey = not drawn for this profile: the series' one stated value (ADR 0087).
Outside corner radius h grey = house rule: the web w is as thick as
the lip t (ADR 0087 row 4).
Not on this profile: d1, g, j (no corner bores
drawn).
Modeled area: the detailed section, checked
against A within 15 % (ADR 0087).
ILLUSTRATIVE INTERIOR - house rule from
Comnemboresialong\the]teigity Misumi HFS6's drawn values (ADR 0087)
Slot depth
Core width
Corner bore diameter
Corner bores across the width
Diagonal web thickness 2h
Sectional area, mm? (catalog) 971*
Modeled area, mm? (detailed) 1098 (+13.1 %)
Detailed level - 60x60 - 2:1 interior illustrative (ADR 0087)
TITLE
'? CommunityCAD Size drawing, 60x60
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard (ADR 0034) - per Misumi HFS6 - Motedis (outline, slot) Aluminium extrusion - 60x60
SHEET REV SCALE PROJECTION UNITS CC-EXTR30-B8-SZ-60x60 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE €05¢8289049003c09e32d8bd4ae913179e09a28c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.