ISO 15 single row deep groove ball bearings, 603
Size drawing - 603 values on the views - 2Z shown, width B1 (2RS the same; the open bearing is B wide) - enlarged 5:1
Bearing
603 5.000
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L15.
Notes
2 r: the sources give r_s min only; modeled at that limit.
Ring corners, faces and the shield recess are house conventions, sheet DO2.
B1 = 5.000
View from above
TITLE
'? CommunityCAD Size drawing, 603
STANDARDS FOLLOWED FAMILY / DETAIL ISO 15 (edition not printed by the sources) Deep groove ball bearing - 603 SHEET REV SCALE PROJECTION UNITS
CC-1S015-SZ-603 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE 6aab1ad286d2ad639684ae08e37af fb4700F Fd8F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.