ISO 15 single row deep groove ball bearings, 6001
Size drawing - 6001 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 2:1
View from above
Bearing
6001
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 4.
Notes
2 r: the sources give r_s min only; modeled at that limit.
Ring corners, faces and the shield recess are house conventions, sheet DO2.
TITLE
'? CommunityCAD Size drawing, 6001
STANDARDS FOLLOWED ISO 15 (edition not printed by the sources)
FAMILY / DETAIL
Deep groove ball bearing - 6001
SHEET
CC-1S015-SZ-6001
REV SCALE PROJECTION
A 21
UNITS
Dimensions in mm
SPEC VERSION 6aab1ad286d2ad639684ae08e37af fb4700F Fd8F CC-BY 4.0 IronPixel Labs LLC
LICENSE
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.