6 mm Taper Pin (Tapered Pin), ISO 2339

All 18 lengths from 22 to 90 mm, each as simplified STEP: one 6 mm taper pin (ISO 2339).

How these parts are made, and what the levels mean: read the method

• Also searched as: 6 mm pin, 6 mm x 22 to 6 mm x 90 pins
• Model id: iso2339-d6
• Standard: ISO 2339:1986 · size 6 mm

Lengths

Length (mm)	Part key	Simplified
22	iso2339-d6x22	STEP
24	iso2339-d6x24	STEP
26	iso2339-d6x26	STEP
28	iso2339-d6x28	STEP
30	iso2339-d6x30	STEP
32	iso2339-d6x32	STEP
35	iso2339-d6x35	STEP
40	iso2339-d6x40	STEP
45	iso2339-d6x45	STEP
50	iso2339-d6x50	STEP
55	iso2339-d6x55	STEP
60	iso2339-d6x60	STEP
65	iso2339-d6x65	STEP
70	iso2339-d6x70	STEP
75	iso2339-d6x75	STEP
80	iso2339-d6x80	STEP
85	iso2339-d6x85	STEP
90	iso2339-d6x90	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
d	Small-end diameter, nominal	5.952	6	6	6	nominal	L1
a	End dome length		0.8 ref		0.8	reference value	L1
taper	Taper (1:x)		50		50	nominal	L1

Drawing

As a PDF: CC-ISO2339-SZ-6.pdf.

The 6 mm taper pin beside the 5 mm and the 8 mm

The 6 mm is number 6, counting from the smallest, of the 7 ISO 2339 taper pins published here, from 2 mm to 8 mm.

• Small-end diameter, nominal (d): 6 mm on the 6 mm taper pin, against 5 mm on the 5 mm and 8 mm on the 8 mm.
• End dome length (a): 0.8 mm (reference) on the 6 mm taper pin, against 0.63 mm (reference) on the 5 mm and 1 mm (reference) on the 8 mm.
• Taper (1:x) (taper): 50 mm on the 6 mm taper pin, the same on the 5 mm and the 8 mm.

Other sizes

• One size smaller: 5 mm Taper Pin (Tapered Pin), ISO 2339.
• One size larger: 8 mm Taper Pin (Tapered Pin), ISO 2339.

Documents

• CC-ISO2339-DS-6.pdf: 6 datasheet: values with levels, lengths, sources
• CC-ISO2339-SZ-6.pdf: 6 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

boltport-iso2339, fasten-it-din-en-22339, fasten-it-iso2339, minibearings-taper-pins, pts-taper-pins. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.