ISO 2936 hexagon socket screw key (hex key), s 6
Size drawing - s 6 values on the views - scale 1:1
6
5.975 5.95-6.00
Width across flats (the size)
6.755¢ 6.70-6.81
Width across corners
96 92-96
Long arm, standard
141 137-141
r = 6 (Ss max) Long arm, long (-L)
Long arm, extra-long (-XL) 186 182-186
- fs = 5.975 \ 5.95-6.00 WwW 38
Short arm
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 10.
Notes
Sizes are the width across flats s; the standard arm is drawn, -L and -XL differ in 11. Grey under a length: its limits (nominal plus Table 1's deviations).
r = s max, the bend's inner radius; the bend is 90° (ADR 0102, not tabled). Section and ends are house conventions, sheet D02.
TITLE
'? CommunityCAD Size drawing, s 6
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 2936:2014 Hexagon socket screw key -s 6 SHEET REV SCALE PROJECTION UNITS CC-1802936-SZ-6 A 1:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 38961b18cdce81745e7c92eee15d7cbafe461574 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.