6 mm Dowel Pin, ISO 2338 datasheet (PDF)

Datasheet — 6 mm Dowel Pin, ISO 2338 by Milo

Open the PDF
6 mm Dowel Pin, ISO 2338Get the CAD model6 mm Dowel Pin, ISO 2338CC-ISO2338-DS-6.pdf

Text of this datasheet

* CC-1S02338-DS-6 revA '?) CommunityCAD Size datasheet - 06

ISO 2338 @6 parallel pin, m6

Size datasheet: this size's values with their levels, its lengths, conventions and sources.

Diameter @6 m6, modeled at 6.008 mm

Lengths 17 generated, | = 12-60

Files 17 STEP AP214 (one detail level)

@6 x 20, front view, 3:1

Dimension

d Nominal diameter 6 mé Tolerance band m6 (deviation from d) 0.008 L1- 2 0.004-0.012

c End chamfer, axial length 1.2 ref a End chamfer angle to the surface, deg 15 ref

Modeled value: nominal, else the midpoint of min-max. m6: deviation from d. ref: reference value. * amber: one source (LO). Level - independent sources.

ISO 2338:1997 - ISO 286-2 (tolerance class m6) Page 1/2 Parallel pin - @6 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

---

'?) CommunityCAD

CC-1S02338-DS-6 revA Size datasheet - 6

Lengths

| Status 12 built - 14 built a 16 built - 18 built - 20 built - 22 built = 24 built - 26 built - 28 built - 30 built - 32 built - 35. built - 40 built - 45 built - 50 built - 55 built - 60 built -

One STEP file per length, one detail level.

Conventions « Diameter: the middle of the ISO 286-2 m6 band (h8 isn't modeled).

Part key

iso02338-d6x12 iso2338-d6x14 iso02338-d6x16 iso2338-d6x18 iso02338-d6x20 iso02338-d6x22 iso02338-d6x24 is02338-d6x26 is02338-d6x28 iso02338-d6x30 is02338-d6x32 iso02338-d6x35 iso02338-d6x40 iso2338-d6x45 iso02338-d6x50 iso2338-d6x55 iso02338-d6x60

e Ends: a chamfer c at = 15° to the surface at both ends, flat end faces (owner entry from ISO 2338 Figure 1).

« Sharp edges, no markings; material and finish are metadata only.

Sources

Source Publisher

iso2338-1997-sample ISO (preview published by iTeh Standards)

iso2338-1997-sample-text ISO (preview published by iTeh Standards)

fasten-it-is02338 fasten.it

opac-iso2338 OPAC

kipp-k2013 KIPP (copy hosted by Marek)

mechcodex-dowel-pins-metric MechCodex

boltport-iso2338 Boltport

engineersedge-iso286-shafts Engineers Edge

mechcodex-dowel-pins-metric-mé MechCodex

The whole series (verification map, drawings): CC-ISO2338-DS.

ISO 2338:1997 - ISO 286-2 (tolerance class m6) Parallel pin - @6 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC

Retrieved

n/a

n/a

2026-10-25 2026-10-25 2026-10-25 2026-10-25 2026-10-25 2026-10-25 2026-10-25

sha256

841b4692d664 (kept outside the repo)

841b4692d664 (kept outside the repo)

dbb0979696ad Sd3dee2cf8e4 335b94d398a7 2cefO04b5d7F 12146dbe9fc8 9799d88b4078 2cefO04b5d7F

Page 2/2

spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.