ISO 2795 sintered bronze bush, cylindrical, 5x9
Size drawing - 5x9 values on the views - L = 5 shown; lengths 4, 5, 8 - enlarged 5:1
Sx?
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
L=5 shown House convention = a detail no source dimensions, drawn to a stated house rule. lengths 4-8 This size's values: L2 3-111.
Notes
Sizes are d x D: normal and thin-wall series side by side, as in Table 1.
L: the size's lengths in Table 1, each its own file; the views show the middle one. C is within the owner's quarter-wall cap at every size here, so it is modeled as given.
C <0.3,a = 45°
D
View from above
TITLE
'? CommunityCAD Size drawing, 5x9
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 2795:2020 Sintered bronze bush, cylindrical - 5x9 SHEET REV SCALE PROJECTION UNITS CC-1802795-SZ-5x9 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE
70b2bf787ea8F07904ce030af50bcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.