DIN 6885 parallel key, forms A, Band AB, 5x5
Size drawing - 5 x 5 values on the views - | = 25 shown - enlarged 2:1
Sym. | Dimensio
Width (h9)
s = 0.325 (45° every edge) SERRE, 0.25-0.40
Edge chamfer h = 4.985 4.97-5
Shaft diameter range (reference) Side view, form A
| = 25 shown lengths 10-56 ; Shaft keyway depth (reference)
Hub keyway depth (reference)
Form A: two round ends Round end radius (b/2), forms A and AB
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
Form B: two square ends L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L16.
Notes
b and h at their h9 bands' midpoints, the nominal naming the band's top (ADR 0014). s at its range's midpoint, a 45° chamfer on every edge (house convention).
Shaft: over the first value, up to and including the second. Not modeled.
tl, t2: the keyway the key fits, shown for your keyway design. Not modeled.
Form AB: one round end, one square end
TITLE
'? CommunityCAD Size drawing, 5 x5
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 6885-1:2021-11 Parallel key - forms A, B, AB-5x 5 SHEET REV SCALE PROJECTION UNITS CC-DIN6885-SZ-5x5 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 1fa02885ed33ccOe2d8b2F73686ba418650b8d17 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.