. CC-1$0184-DS$-51107 rev A '?) CommunityCAD Size datasheet - 51107
ISO 104 51107 thrust ball bearing
Size datasheet: this bearing's values with their levels, conventions and sources.
For 35 mm shafts, axial loads in one direction
Part key iso104-51107
Files 1 STEP AP214 (simplified)
51107, front view, 0.75:1 51107, view from above, 0.4:1 Sym. Dimension Value Level d Shaft washer bore 35 L1- 3 D Housing washer outside diameter 52 L1- 3 T Height 12 L1- 3 da Shaft washer outside diameter (=) 52.000 ref l1 + 2 D1 Housing washer bore (=) 37.000 ref l1 + 2 r Chamfer dimension r_s min > 0.6 L1- 3
Modeled value: nominal, else the midpoint of min-max. =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 104 (edition not printed by the sources) Page 1/2 Thrust ball bearing - 51107 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
. CC-1$0184-DS$-51107 rev A '?) CommunityCAD Size datasheet - 51107
Conventions
« Washers: Each washer T/3 thick: the housing washer from the back face at Z = 0, the shaft washer at the top, the middle third the gap between them.
« Web, no balls: A solid web ring joins the washers in the middle half of the band between D1 and d1, so the gap shows all round. Balls, cage and raceway grooves are not modeled.
e Corners: The eight washer corners are quarter-rounds of r_s min, the smallest the standard allows; the shape isn't specified. The web's edges are sharp.
« Values: d, D and T at their nominals; d1 and D1 at the makers' approximate values; r at r_s min, the only limit the sources give.
« Markings and grades: No markings. Tolerance class and lubricant are not geometry: one model per bearing.
Sources
Source Publisher Retrieved sha256
nsk-thrust NSK 2026-10-29 8d5e0d8816a1 ntn-bearingfinder-thrust NTN Americas 2026-10-29 640e3a9788b0
skf-17000-thrust SKF 2026-10-29 65e0919bee24 (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-ISO104-Ds.
ISO 104 (edition not printed by the sources) Page 2/2 Thrust ball bearing - 51107 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.