ISO 104 single direction thrust ball bearing, 51106
Size drawing - 51106 values on the views - enlarged 2:1
Bearing
51106 11 47.000 ref 32.000 ref
Source levels Main value = the modeled value (nominal, else the middle of min-max). d1 = 47.000 ref Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. | L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L16. Notes 2 r: the sources give r_s min only; modeled at that limit. ref d1, D1: the makers' approximate values (=), modeled as given. . Washer thickness, the web and the corners are house conventions, sheet DO2.
D1 = 32.000 ref
d1 = 47.000 ref
TITLE
'? CommunityCAD Size drawing, 51106
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 104 (edition not printed by the sources) Thrust ball bearing - 51106
SHEET REV SCALE PROJECTION UNITS CC-1S80104-SZ-51106 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c CC-BY 4.0 IronPixel Labs LLC 1/1
View from above
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.