ISO 104 single direction thrust ball bearing, 51103
Size drawing - 51103 values on the views - enlarged 2:1
Bearing
51103 9 30.000 ref 18.000 ref
Source levels Main value = the modeled value (nominal, else the middle of min-max). d1 = 30.000 ref Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L16. Notes : \ i 2 r: the sources give r_s min only; modeled at that limit. | ref d1, D1: the makers' approximate values (=), modeled as given. . Washer thickness, the web and the corners are house conventions, sheet DO2.
D1 = 18.000 ref
D=30
d1 = 30.000 ref
View from above
TITLE
'? CommunityCAD Size drawing, 51103
STANDARDS FOLLOWED FAMILY / DETAIL ISO 104 (edition not printed by the sources) Thrust ball bearing - 51103
SHEET REV SCALE PROJECTION UNITS
CC-180104-SZ-51103 A 2:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE
c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.