ISO 104 single direction thrust ball bearing, 51100
Size drawing - 51100 values on the views - enlarged 5:1
d1 = 24.000 ref
L
1
D1 = 11.000 ref
Bearing
51100 9 24.000 ref
11.000 ref
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L16.
Notes
2 r: the sources give r_s min only; modeled at that limit.
ref d1, D1: the makers' approximate values (=), modeled as given.
Washer thickness, the web and the corners are house conventions, sheet DO2.
TITLE
'? CommunityCAD Size drawing, 51100
STANDARDS FOLLOWED
ISO 104 (edition not printed by the sources)
FAMILY / DETAIL
Thrust ball bearing - 51100
d1 = 24.000 ref
View from above
SHEET
CC-1S0104-SZ-51100 A 5:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.