'?) CommunityCAD CC-1S08752-DS-SrevA
Size datasheet - @5
ISO 8752 @5 slotted spring pin, heavy duty
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
TIN Diameter @5 (the hole); free outside d1 = 5.5 mm, bore 3.5 mm
Lengths 25 generated, | = 5-80 Files 25 STEP AP214 (one detail level) | | 5 x 20, front view, 3:1 Sym. Dimension Value Level d Nominal diameter (the hole's, H12) 5 L1- 2 d1 Outside diameter, before mounting 5.5 L1- 4 5.4-5.6 d2 Inside diameter, before mounting (ref) 3.4 ref L1 +4 s Wall thickness 1.0 Ll: 4 a End chamfer, axial length 1.0 L1- 2 0.9-1.1 w Slot width mt (d1 max - d), clause 4 1.885* lo: 1 F Double shear strength, min, KN > 17.54 L1- 3
Modeled value: nominal, else the midpoint of min-max, before mounting. ref: reference value. * amber: one source (LO). Level - independent sources.
ISO 8752:2009 Page 1/2 Spring pin - @5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S08752-DS-SrevA Size datasheet - @5
'?) CommunityCAD
Lengths
| Thread Part key
5 built - - iso8752-d5x5
6 built - - iso08752-d5x6
8 built - - iso08752-d5x8 10 built - - iso8752-d5x10 12 built - - is08752-d5x12 14 built 3 - iso8752-d5x14 16 built - - is08752-d5x16 18 built - - is08752-d5x18 20 built - - iso8752-d5x20 22 built - - is08752-d5x22 24 built - - is08752-d5x24 26 built - - is08752-d5x26 28 built - - is08752-d5x28 30 built - - is08752-d5x30 32 built - - is08752-d5x32 35 built - - is08752-d5x35 40 built - - is08752-d5x40 45 built - - is08752-d5x45 50 built - - is08752-d5x50 55 built - - iso8752-d5x55 60 built - - is08752-d5x60 65 built - - is08752-d5x65 70 built - - iso08752-d5x70 75 built - - iso8752-d5x75 80 built - - is08752-d5x80
One STEP file per length, one detail level. Listed by one source only, not generated: | = 36.
Conventions
« Modeled free, before mounting: d1 at the middle of its band, bore d1 - 2 s.
¢ Slot: full length, radial faces, w = mt (d1 max - d) (not specified by the standard; from the clause 4 closing requirement). « Ends: a chamfer a long to d3 = d1 - s at both ends (house rule, ADR 0061).
« Sharp edges, no markings; material and finish are metadata only.
Sources
Source Publisher Retrieved sha256
iso8752-2009-sample ISO (preview published by iTeh Standards) n/a 7594fabe5014 (kept outside the repo) fasten-it-iso8752 fasten.it 2026-10-26 c901b114ee7a
fuller-iso8752 Fuller Fasteners 2026-10-26 e3c86e160c54
fasteners-eu-iso8752 fasteners.eu 2026-10-26 fbe1001a16a0
spirol-iso8752 SPIROL 2026-10-26 d71481d70a68
pule-iso8752-slot CommunityCAD 2026-10-27 1ddaéd6d18dc
The whole series (verification map, drawings): CC-ISO8752-DS.
ISO 8752:2009 Page 2/2 Spring pin - @5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.