ISO 2795 sintered bronze bush, cylindrical, 4x7
Size drawing - 4x7 values on the views - L = 4 shown; lengths 3, 4, 6 - enlarged 10:1
4x7
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 3-111. Notes L = 4 shown Sizes are d x D: normal and thin-wall series side by side, as in Table 1. lengths 3-6 L: the size's lengths in Table 1, each its own file; the views show the middle one. C is within the owner's quarter-wall cap at every size here, so it is modeled as given.
C < 0.3, a = 45°
TITLE
'? CommunityCAD Size drawing, 4x7
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 2795:2020 Sintered bronze bush, cylindrical - 4x7 SHEET REV SCALE PROJECTION UNITS CC-1802795-SZ-4x7 A 10:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE
70b2bf787ea8F07904ce030af50bcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
View from above
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.