'?) CommunityCAD CC-1S02795-DS-4x7 rev A
Size datasheet - 4x7
ISO 2795 4x7 sintered bronze bush
Size datasheet: this bush's values with their levels, conventions and sources.
For 4mm shafts in a 7 mm housing bore Part key iso2795-c-4x7x<L> Files 3 STEP AP214 (simplified), one per length ST Lengths 3mm, 4mm, 6mm
4x7, front view, 5:1 4x7, view from above, 3:1
Dimension Inside diameter D Outside diameter 7 c Edge chamfer, maximum < 0.3
a Chamfer angle from the axis, degrees 45 L1- 2
Modeled value: nominal, else the midpoint of min-max. : only that limit is given, modeled at it. * amber: one source (LO). c: a source value was corrected. house: a stated rule. Level - independent sources.
ISO 2795:2020 Page 1/2 Sintered bronze bush - 4x7 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 70b2bf787ea8F07904ce030af50bcaf231F0c68F
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
'?) CommunityCAD CC-1S02795-DS-4x7 rev A
Size datasheet - 4x7
Lengths L Status Part key 3 built - - is02795-c-4x7x3 4 built - - is02795-c-4x7x4 6 built - - is02795-c-4x7x6
One STEP file per length, one detail level.
Conventions
« Edition and scope: ISO 2795:2020, Tables 1 and 2 from its complete free preview. Every Table 1 row with d 2 to 12, normal and thin- wall series.
e Values: d, D and L at their nominals: the sources give tolerance classes (before fitting G7/G8 bore, s7/s8 outside, js13 length; H7 or H8 bore after press -fitting), not limits. The model is the nominal part before fitting, concentric.
« Chamfers: On the bore and outside edges at both ends: Table 2's maximum C for the wall (D - d)/2, modeled at the limit, along the axis, and C tan(q) across it; a from Figure 1. Capped at a quarter of the wall; the cap is the owner's rule.
e Frame: Z the axis, one end face at Z = 0, the other at Z = L. The form is symmetric, so either end works.
« Grooves, holes, markings, finish: None modeled: standard parts are plain, and a press-fit part carries no CommunityCAD mark. Sintered bronze, oil impregnated: render material only.
Sources
Source Publisher Retrieved sha256
iso2795-2020-sample ISO (preview published by iTeh Standards) 2026-10-30 0aa42b950205 (kept outside the repo) iso2795-2020-sample-figures ISO (preview published by iTeh Standards) 2026-10-30 0aa42b950205 (kept outside the repo) bowman-iso2795-plain Bowman International 2026-10-30 195596e71b6f
selfoil-iso2795-plain SELFOIL (Spain) 2026-10-30 8309193495 (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-ISO2795-Ds.
ISO 2795:2020 Page 2/2 Sintered bronze bush - 4x7 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 70b2bf787ea8F07904ce030af50bcaf231F0c68F
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.