45x90 slot 10 Extrusion End Cap size drawing (PDF)

Datasheet — 45x90 slot 10 Extrusion End Cap by Milo

Open the PDF
45x90 slot 10 Extrusion End CapGet the CAD model45x90 slot 10 Extrusion End CapCC-ENDCAP-SZ-s10-45x90.pdf

Text of this datasheet

Extrusion end cap, per profile cross-section, s10-45x90

Size drawing - s10-45x90 values on the views - enlarged 2:1

Rr=3*

Sym. Dimensi

Cap width

Cap height

Seat thickness

Corner radius

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule.

This size's values: L1 2 - LO 2.

Notes

No published standard: values from the makers' drawings (ADR 0034). Plugs, face round and mark are illustrative: sheet DO2.

TITLE

'? CommunityCAD Size drawing, s10-45x90

STANDARDS FOLLOWED

No published standard (makers' drawings)

FAMILY / DETAIL

Extrusion end cap - s10-45x90

SHEET

CC-ENDCAP-SZ-s10-45x90 A 2:1

REV SCALE PROJECTION

UNITS

Dimensions in mm

SPEC VERSION

LICENSE

3¢4229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC

PAGE

1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.