EN 10056 equal leg steel angle, 45x45x6
Size drawing - 45x45x6 values on the views - enlarged 3:1
Sym. | Dimensi 45x45x6
Leg length 45
Leg thickness
Root radius
Toe radius
Sectional area, cm?
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L13 - LO 2.
Notes
r2 = 11/2 at every size; * where only roymech's table states it (ADR 0114 row 8). Ais the tables' area, a check on the model, not modeled (cm?).
TITLE
'? CommunityCAD Size drawing, 45x45x6
STANDARDS FOLLOWED
EN 10056-1:2017 (through free tables)
FAMILY / DETAIL
Equal leg steel angle - 45x45x6
SHEET
CC-EN10056-SZ-45x45x6 A 3:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
1fa02885ed33ccOe2d8b2F73686ba418650b8d17 CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.