40 and 45 slot 10 aluminium extrusion, per Misumi HFS8, 45x45
Size drawing - 45x45 values on the views - enlarged 2:1
Source levels Sym. | Dimension (mi Main value = the modeled value (nominal, else the middle of min-max). Profile width Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and Slot undercut width marked *
Profile height
Slot pitch (cell side)
r = 3* (4 corners) Slot opening
c = a source value was corrected; the Lip thickness datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L13 - LO 8. Notes L1 here = two makers agree; value = the w = 2h (diagonal web) maker's drawn nominal. Core width * = Misumi HFS8's drawing alone (as #958 item 1A). @ d = 12.5* (each core) Core bore diameter = grey = derived: e = t + u (the slot floor); p=a for one cell.
Lip to core face
Slot depth
Outside corner radius h grey = house rule: core k = d + 2w, or out to the slot floor (ADR 0089 row 2);
web w as thick as the corner tube wall f (row 3). Not on this profile: v (one slot per face). Modeled area: the detailed section, checked against A within 12 % (ADR 0089). ILLUSTRATIVE INTERIOR - house rule from
Wall between two slots Misumi HFS8's drawn values (ADR 0089)
Corner tube side
Corner tube wall
corner tube (4) Diagonal web thickness 2h
Sectional area, mm? (catalog) 777%
Detailed level - 45x45 - 2:1
. oe . Modeled area, mm? (detailed) 748 (-3.7 %) interior illustrative (ADR 0089)
TITLE
'? CommunityCAD Size drawing, 45x45
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard (ADR 0034) - per Misumi HFS8 - Motedis, Rexroth Aluminium extrusion - 45x45
SHEET REV SCALE PROJECTION UNITS CC-EXTRS10-SZ-45x45 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 6aab1ad286d2ad639684ae08e37afFb4700F Fd8F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.