20 V-slot aluminium extrusion, per OpenBuilds V-Slot, 40x80
Size drawing - 40x80 values on the views - enlarged 2:1
Sym. | Dimension (mi
Profile width
Profile height
Face to first slot centre (cell 2q) Slot opening (lip tips)
va = 90°* (V angle) V mouth width at the face
r = 1.50* (4 corners)
V angle, degrees
Slot undercut width
@ d = 4.60* (each core) Lip thickness
Cavity depth behind the lip Slot depth (t + u)
Core bore diameter Diagonal web thickness Outside corner radius C-Beam arm width C-Beam channel floor
Modeled area, mm? (detailed)
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 2 - LO 13.
Notes
L1 here = OpenBuilds and Ooznest agree; value = OpenBuilds' drawn nominal. * = OpenBuilds alone, or Ooznest's e (#983 items 1, 2).
A: the detailed section's area, reported; no maker publishes one (ADR 0086).
w = 1.50* (diagonal web)
Detailed level - C-Beam 40x80 - 2:1 TITLE
OpenBuilds! section, CCBYSA 4.0 '? CommunityCAD Size drawing, 40x80
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard (ADR 0034) - OpenBuilds V-Slot - Ooznest (outline) Aluminium extrusion - 40x80 SHEET REV SCALE PROJECTION UNITS CC-EXTR20-VSLOT-SZ-40x80 A 2:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE €05¢8289049003c09e32d8bd4ae913179e09a28c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.