40 slot 10 single Extrusion Corner Bracket
Legs of 43 mm and 43 mm, 30 mm across, with 8.2 mm holes: the 40 slot 10 single extrusion corner bracket, as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 40 slot 10 single cast angle bracket, 40 slot 10 single angle corner connector, 40 slot 10 single L bracket, 40 slot 10 single gusset bracket
- Model id:
extrusion-corner-brackets-s10-single
- Standard: Extrusion corner bracket · size 40 slot 10 single
Files
| Part key | Simplified |
|---|
extrusion-corner-brackets-s10-single | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| l | Leg length | | 43 | | 43 | nominal | L0 (nom: one source) |
| h | Upright leg length | | 43 | | 43 | nominal | L0 (nom: one source) |
| w | Width | | 30 | | 30 | nominal | L0 (nom: one source) |
| t | Wall thickness | | 8.2 | | 8.2 | nominal | L0 (nom: one source) |
| tu | Upright wall thickness | | 9 | | 9 | nominal | L0 (nom: one source) |
| d | Hole diameter | | 8.2 | | 8.2 | nominal | L0 (nom: one source) |
| n | Number of holes | | 2 | | 2 | nominal | L0 (nom: one source) |
| k | Key height | | 2 | | 2 | nominal | L0 (nom: one source) |
| ex | Hole row on the first leg | | 30 | | 30 | nominal | L0 (nom: one source) |
| ez | Hole row on the upright leg | | 20 | | 20 | nominal | L0 (nom: one source) |
| ey | Hole column from the side | | 15 | | 15 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-CORNBRKT-SZ-s10-single.pdf.
The 40 slot 10 single extrusion corner bracket beside the 40 I-type slot 8 large and the 40 slot 10 double
The 40 slot 10 single is number 8 of the 10 Extrusion corner brackets published here, listed from 20 B-type slot 6 single to 45 slot 10 single.
- Leg length (l): 43 mm on the 40 slot 10 single extrusion corner bracket, against 80 mm on the 40 I-type slot 8 large and 40 mm on the 40 slot 10 double.
- Upright leg length (h): 43 mm on the 40 slot 10 single extrusion corner bracket, against 80 mm on the 40 I-type slot 8 large and 40 mm on the 40 slot 10 double.
- Width (w): 30 mm on the 40 slot 10 single extrusion corner bracket, against 40 mm on the 40 I-type slot 8 large and 70 mm on the 40 slot 10 double.
- Wall thickness (t): 8.2 mm on the 40 slot 10 single extrusion corner bracket, against 9 mm on the 40 slot 10 double.
- Hole diameter (d): 8.2 mm on the 40 slot 10 single extrusion corner bracket, the same on the 40 slot 10 double.
- Number of holes (n): 2 on the 40 slot 10 single extrusion corner bracket, against 4 on the 40 slot 10 double.
- Key height (k): 2 mm on the 40 slot 10 single extrusion corner bracket, the same on the 40 slot 10 double.
Other sizes
Conventions
- Simplified only: one solid. STEP AP214, millimetres, the corner where the legs' profile faces meet on the Y axis, one leg's face at Z = 0 along +X, the other's at X = 0 up +Z, the width across Y from 0.
- Side walls, rib, key width and length, inside fillet and the curved diagonal are illustrative, not any maker's design.
- The CommunityCAD mark recessed 0.3 mm in an outside side wall, illustrative.
Documents
Sources
misumi-cast-brackets. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...