Extrusion corner bracket, per profile system, s10-double
Size drawing - s10-double values on the views - enlarged 1.5:1
Sym. Dimensi
L Leg length
Upright leg length
Wall thickness
Hole diameter
Number of holes
Key height
Hole row on the first leg
Hole row on the upright leg
ey Hole column from the side
py Hole column spacing
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: LO 11.
Notes
No published standard: each value the reference maker's drawing, single source (ADR 0034). Side walls, keys' width and length, fillet and mark are illustrative: sheet DO2.
TITLE
'? CommunityCAD Size drawing, s10-double
STANDARDS FOLLOWED FAMILY / DETAIL No published standard (makers' drawings) Extrusion corner bracket - s10-double
SHEET REV SCALE PROJECTION UNITS
CC-CORNBRKT-SZ-s10-double | A 15:1 & Dimensions in mm SPEC VERSION LICENSE PAGE
c7a962633bdbeSécéabcf253a98F14b1bbf3bd0F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.