CC-CORNBRKT-DS-s10-double rev A Size datasheet - s10-double
'?) CommunityCAD
40 slot 10 double corner bracket
Size datasheet: this size's values with their levels, conventions and sources.
For 40 slot 10 aluminium extrusions
Part key extrusion-corner-brackets-s10- double
Files 1 STEP AP214 (simplified)
s10-double, face, 0.5:1 s10-double, side, 0.5:1 (hidden lines dashed) Sym. Dimension Value Level L Leg length 4Ox Lo -1 h Upright leg length 4Ox* lo. 1 w Width 70x Lo -1 t Wall thickness Ox Lo -1 d Hole diameter 8.2% Lo -1 n Number of holes Gx Lo -1 k Key height 2x lo. 1 ex Hole row on the first leg 30x* Lo: 1 ez Hole row on the upright leg 20* lo. 1 ey Hole column from the side 15* Lo: 1 py Hole column spacing 40x lo- 1
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
No published standard (makers' drawings) Page 1/2 Extrusion corner bracket - s10-double - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
* CC-CORNBRKT-DS-s10-double rev A '?) CommunityCAD Size datasheet - s10-double
Conventions
« Casting: Side walls of the wall thickness, an inside fillet, key width and length and, on the slot 10 and 45 brackets, a curved diagonal: illustrative, not any maker's design.
« Mark: The CommunityCAD mark recessed 0.3 mm in an outside side wall. Illustrative.
« Values: No published standard: every maker casts its own bracket, so each size is the reference maker's own casting (Misumi, OpenBuilds, item), single source. item's sheets give only the outline and holes: its wall and key are house proportions, its hole ISO 273 medium for M8. On the 20 B-type slot 6 double, Misumi's drawing alone shows which holes sit on its rows. The two readings disagreed, and the owner accepted this layout: 4 holes on the first leg in two rows, 2 on the upright in one, no centre column.
« \V-slot holes: OpenBuilds' drawing gives the holes of the 20 V-slot bracket no position, so they sit at the middle of the leg and of the width, a rule rather than a maker's dimension.
¢ Finish: Cast aluminium, the reference part's finish: render and metadata only. First leg's profile face at Z = 0, the upright's at X = 0, the keys beyond them.
Sources Source Publisher Retrieved sha256 misumi-cast-brackets MISUMI 2026-10-30 7b0132a5b737 (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-CORNBRKT-DS.
No published standard (makers' drawings) Page 2/2 Extrusion corner bracket - s10-double - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
