40 I-type slot 8 Slot Cover

STEP · STL Supports CommunityCAD0 downloads
40 I-type slot 8 Slot Cover
1 / 6

40 I-type slot 8 Slot Cover

The 40 I-type slot 8 slot cover (Extrusion slot cover): face width 8 mm, depth 11 mm, leg width 9.4 mm. Available as 14 lengths from 100 to 2000 mm, each as simplified STEP.

40 I-type slot 8 × 100 slot cover, Extrusion slot cover

How these parts are made, and what the levels mean: read the method

  • Also known as: 40 I-type slot 8 slot cover strip, 40 I-type slot 8 T-slot cover, 40 I-type slot 8 extrusion slot filler, 40 I-type slot 8 panel holder, 40 I-type slot 8 x 100 to 40 I-type slot 8 x 2000
  • Model id: extrusion-slot-covers-40-i8
  • Standard: Extrusion slot cover · size 40 I-type slot 8

Lengths

Length (mm)Part keySimplified
100extrusion-slot-covers-40-i8x100STEP
150extrusion-slot-covers-40-i8x150STEP
200extrusion-slot-covers-40-i8x200STEP
250extrusion-slot-covers-40-i8x250STEP
300extrusion-slot-covers-40-i8x300STEP
350extrusion-slot-covers-40-i8x350STEP
400extrusion-slot-covers-40-i8x400STEP
450extrusion-slot-covers-40-i8x450STEP
500extrusion-slot-covers-40-i8x500STEP
600extrusion-slot-covers-40-i8x600STEP
750extrusion-slot-covers-40-i8x750STEP
1000extrusion-slot-covers-40-i8x1000STEP
1500extrusion-slot-covers-40-i8x1500STEP
2000extrusion-slot-covers-40-i8x2000STEP

Dimensions

Dimension symbols for 40 I-type slot 8 slot covers (Extrusion slot cover)

SymbolNameminnommaxModeledRuleLevel
bFace width88nominalL1
hDepth1111nominalL1
b1Leg width9.49.4nominalL0 (nom: one source)
b2Open-side gap6.66.6nominalL0 (nom: one source)

Drawing

Drawing of the 40 I-type slot 8 slot cover with its values (Extrusion slot cover)

As a PDF: CC-SLOTCOVER-SZ-40-i8.pdf.

The 40 I-type slot 8 slot cover beside the 30 B-type slot 8 and the 40 slot 10

The 40 I-type slot 8 is number 3 of the 5 Extrusion slot covers published here, listed from 20 B-type slot 6 to 45 slot 10.

  • Face width (b): 8 mm on the 40 I-type slot 8 slot cover, against 8.3 mm on the 30 B-type slot 8 and 10 mm on the 40 slot 10.
  • Depth (h): 11 mm on the 40 I-type slot 8 slot cover, against 9 mm on the 30 B-type slot 8 and 13 mm on the 40 slot 10.
  • Leg width (b1): 9.4 mm on the 40 I-type slot 8 slot cover, against 10.2 mm on the 30 B-type slot 8 and 11 mm on the 40 slot 10.
  • Open-side gap (b2): 6.6 mm on the 40 I-type slot 8 slot cover, against 5.6 mm on the 40 slot 10.

Other sizes

Conventions

  • Simplified only: one solid. STEP AP214, millimetres, the section in XY centred on X = 0, the face's outside at Y = 0, the legs toward -Y, the strip along +Z from its end face at Z = 0.

Documents

Sources

item-cover-profile-8, kipp-k1054. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-SLOTCOVER-DS-40-i8.pdf

* CC-SLOTCOVER-DS-40-i8 revA '?) CommunityCAD Size datasheet - 40-i8 AO |-type slot 8 extrusion slot cover Size datasheet: this size's values with their levels, conventions and sources. For AO I-type slot 8 aluminium extrusion slots Part keys extrusion-slot-covers- 40-i8x100 ... (one per stock…

View full datasheet →

docs/CC-SLOTCOVER-SZ-40-i8.pdf

Extrusion slot cover, per slot system, 40-i8 Size drawing - 40-i8 values on the views - enlarged 8:1 Sym. Dimensi Face width Widest point, across the feet Depth b2 Open-side gap Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max,…

View full datasheet →