'?) CommunityCAD CC-1S08752-DS-4 rev A
Size datasheet - 04
ISO 8752 @4 slotted spring pin, heavy duty
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
STINT Diameter @4 (the hole); free outside d1 = 4.5 mm, bore 2.9 mm
Lengths 20 generated, | = 4-50 Files 20 STEP AP214 (one detail level) I ['/ @4 x 20, front view, 3:1 Sym. Dimension Value Level d Nominal diameter (the hole's, H12) 4 La - 2 d1 Outside diameter, before mounting 4.5 L1- 4 4.4-4.6 d2 Inside diameter, before mounting (ref) 2.8 ref L1-4 s Wall thickness 0.8 L1- 4 a End chamfer, axial length 0.75 La - 2 0.65-0.85 w Slot width mt (d1 max - d), clause 4 1.885* lo: 1 F Double shear strength, min, kN > 11.24 L1- 3
Modeled value: nominal, else the midpoint of min-max, before mounting. ref: reference value. * amber: one source (LO). Level - independent sources.
ISO 8752:2009 Page 1/2 Spring pin - @4 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
'?) CommunityCAD
CC-1S08752-DS-4 revA Size datasheet - 04
Lengths
| Thread
4 built -
5 built a
6 built -
8 built 5 10 built - 12 built 3 14 built - 16 built - 18 built - 20 built - 22 built - 24 built 5 26 built - 28 built - 30 built - 32 built - 35 built - 40 built 5 45 built - 50 built -
Part key
iso8752-d4x4
iso8752-d4x5
iso8752-d4x6 iso8752-d4x8
iso8752-d4x10 iso8752-d4x12
iso8752-d4x14
iso8752-d4x16 iso8752-d4x18
iso8752-d4x20
iso8752-d4x22 iso8752-d4x24
iso8752-d4x26
iso8752-d4x28 iso8752-d4x30
iso8752-d4x32
iso8752-d4x35 iso8752-d4x40
iso8752-d4x45 iso8752-d4x50
One STEP file per length, one detail level. Listed by one source only, not generated: | = 36, 55, 60.
Conventions
+ Modeled free, before mounting: d1 at the middle of its band, bore d1 - 2 s. ¢ Slot: full length, radial faces, w = t (d1 max - d) (not specified by the standard; from the clause 4 closing requirement). « Ends: a chamfer a long to d3 = d1 - s at both ends (house rule, ADR 0061).
« Sharp edges, no markings; material and finish are metadata only.
Sources Source Publisher iso8752-2009-sample ISO (preview published by iTeh Standards) fasten-it-iso8752 fasten.it fuller-iso8752 Fuller Fasteners
fasteners-eu-iso8752 fasteners.eu spirol-iso8752 SPIROL pule-iso8752-slot CommunityCAD
The whole series (verification map, drawings): CC-ISO8752-DS.
ISO 8752:2009 Spring pin - @4 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Retrieved n/a 2026-10-26 2026-10-26 2026-10-26 2026-10-26 2026-10-27
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
sha256
7594fabe5014 (kept outside the repo) c901b114ee7a e3c86e160c54 fbe1001a16a0 d71481d70a68 1ddaéd6d18dc
Page 2/2 spec e79bc69c722a7450eb0be681b46a36c48d05506e