ISO 2936 hexagon socket screw key (hex key), s 4
Size drawing - s 4 values on the views - enlarged 2:1
4
3.975 3.95-4.00
Width across flats (the size)
4.48c 4.43-4.53
Width across corners
74 70-74
Long arm, standard
104 100-104
Long arm, long (-L)
144 140-144
Long arm, extra-long (-XL)
r= 4 (s max) 12 Short arm a
Source levels Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 10. Notes @e = 4.48c Sizes are the width across flats s; the standard arm is drawn, -L and -XL differ in I1. 4.43-4.53 Grey under a length: its limits (nominal plus Table 1's deviations). r = s max, the bend's inner radius; the bend is 90° (ADR 0102, not tabled). Section and ends are house conventions, sheet D02.
s = 3.975 3.95-4.00
TITLE
'? CommunityCAD Size drawing, s 4
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 2936:2014 Hexagon socket screw key -s 4 SHEET REV SCALE PROJECTION UNITS CC-1802936-SZ-4 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 38961b18cdce81745e7c92eee15d7chafe461574 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.