C » i CC-1$02338-DS-4 rev A CommunityCAD Size datasheet - 04
ISO 2338 04 parallel pin, m6
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Diameter @4 m6, modeled at 4.008 mm
Lengths 15 generated, | = 8-40
Files 15 STEP AP214 (one detail level)
@4 x 20, front view, 3:1
Dimension
d Nominal diameter 4 mé Tolerance band m6 (deviation from d) 0.008 L1- 2 0.004-0.012
c End chamfer, axial length 0.63 ref a End chamfer angle to the surface, deg 15 ref
Modeled value: nominal, else the midpoint of min-max. m6: deviation from d. ref: reference value. * amber: one source (LO). Level - independent sources.
ISO 2338:1997 - ISO 286-2 (tolerance class m6) Page 1/2 Parallel pin - @4 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec d48b25e912c3742c9e061547a7d1d28F04a1258c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S802338-DS-4 revA Size datasheet - 04
'?) CommunityCAD
Lengths
| Thread Part key
8 built - - is02338-d4x8 10 built - - is02338-d4x10 12 built - - is02338-d4x12 14 built - - is02338-d4x14 16 built - - is02338-d4x16 18 built 3 - is02338-d4x18 20 built - - is02338-d4x20 22 built - - 1is02338-d4x22 24 built - - is02338-d4x24 26 built - - 1s02338-d4x26 28 built - - is02338-d4x28 30 built - - 1is02338-d4x30 32 built - - is02338-d4x32 35 built - - is02338-d4x35 40 built - - is02338-d4x40
One STEP file per length, one detail level.
Conventions
« Diameter: the middle of the ISO 286-2 m6 band (h8 isn't modeled).
« Ends: a chamfer c at x 15° to the surface at both ends, flat end faces (owner entry from ISO 2338 Figure 1). « Sharp edges, no markings; material and finish are metadata only.
Sources
Source Publisher Retrieved sha256
iso2338-1997-sample ISO (preview published by iTeh n/a 841b4692d664 (kept outside the repo) Standards)
iso2338-1997-sample-text ISO (preview published by iTeh n/a 841b4692d664 (kept outside the repo) Standards)
fasten-it-is02338 fasten.it 2026-10-25 dbb0979696ad
opac-iso2338 OPAC 2026-10-25 5Sd3dee2cf8e4
kipp-k2013 KIPP (copy hosted by Marek) 2026-10-25 335b94d398a7
mechcodex-dowel-pins-metric MechCodex 2026-10-25 2cefO04b5d7F
boltport-iso2338 Boltport 2026-10-25 12146dbe9fc8
engineersedge-iso286-shafts Engineers Edge 2026-10-25 9799d88b4078
mechcodex-dowel-pins-metric-mé MechCodex 2026-10-25 2cefO04b5d7F
The whole series (verification map, drawings): CC-ISO2338-DS.
ISO 2338:1997 - ISO 286-2 (tolerance class m6) Page 2/2 Parallel pin - @4 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec d48b25e912c3742c9e061547a7d1d28F04a1258c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.