'?) CommunityCAD CC-1S02341-DS-4 rev A
Size datasheet - 04
ISO 2341 @4 clevis pin with head, types A and B
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
—— Diameter Shank @4; head @6 x 1 ———_ mm Lengths 15 generated, | = 8-40 Files 30 STEP AP214 (types A and B, one detail level) /
@4 x 20, type B, front view, 2.5:1
Sym. Dimension Value Level d Shank diameter (h11) 4 L1 +4 dk Head diameter (h14) 6 L1 +4 k Head height (js14) 1 La: 4 e Head chamfer, axial length 0.5 ref 1-4 r Underhead fillet radius 0.6 L1- 3 ic End chamfer, axial length, max <1 L1- 4 di Split-pin hole, type B (H13) 4 la - 4 le Hole axis to free end, type B, min > 2.2 L1- 4 B Head chamfer angle from the axis, deg 45 refx lo: 1 a End chamfer angle from the axis, deg 30 refx lo: 1
Modeled value: nominal, else the midpoint of min-max. ref: reference value. * amber: one source (LO). Level - independent sources.
ISO 2341:1986 Page 1/2 Clevis pin - @4 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S802341-DS-4 revA Size datasheet - 04
'?) CommunityCAD
Lengths
| Thread Part key
8 built, AandB - - iso02341-a-d4x8 - iso2341-b-d4x8 10 built, AandB - - iso2341-a-d4x10 - iso2341-b-d4x10 12 built, AandB - - iso02341-a-d4x12 - iso2341-b-d4x12 14 built, AandB - - iso02341-a-d4x14 - iso2341-b-d4x14 16 built, AandB - - is02341-a-d4x16 - iso2341-b-d4x16 18 built, AandB - - 1is02341-a-d4x18 - iso2341-b-d4x18 20 built, AandB - - is02341-a-d4x20 - iso2341-b-d4x20 22 built, AandB - - is02341-a-d4x22 - iso2341-b-d4x22 24 built, AandB - - 1is02341-a-d4x24 + is02341-b-d4x24 26 built, AandB - - is02341-a-d4x26 - iso2341-b-d4x26 28 built, AandB - - is02341-a-d4x28 - iso2341-b-d4x28 30 built, AandB - - is02341-a-d4x30 - iso2341-b-d4x30 32 built, AandB - - is02341-a-d4x32 + iso2341-b-d4x32 35 built, AandB - - is02341-a-d4x35 - iso2341-b-d4x35 40 built, AandB - - is02341-a-d4x40 - iso2341-b-d4x40
One STEP file per length and type, one detail level.
Conventions
* catits max, le at its min; the rest at their nominals (ADR 0078).
e Chamfers at 30° (end) and 45° (head) from the axis, owner entries (#604 item 1). « Sharp head underside, flat top, fillet r; type B's hole along X (#604).
« No markings; material and finish are metadata only.
Sources
Source Publisher Retrieved sha256
fasten-it-din-en-22341 fasten.it 2026-10-27 639865b0624b
boltport-iso2341 Boltport 2026-10-27 56043925167
fasteners-eu-iso2341 fasteners.eu 2026-10-27 95e2bF4F8e07
amesweb-iso2341 AMESweb 2026-10-27 36634a44e50b
amesweb-iso2341-figure AMESweb 2026-10-25 99b8b2cbf58b (kept outside the repo)
The whole series (verification map, drawings): CC-ISO2341-Ds.
ISO 2341:1986 Page 2/2 Clevis pin - @4 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.