ISO 2795 sintered bronze bush, flanged, 3x6x9x1.5
Size drawing - 3x6x9x1.5 values on the views - L = 4 shown; lengths 4 - enlarged 10:1
3x6x9x1.5 . < 0.8% 0.375 0.375
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. L 7 Ashown This size's values: L1 4 - LO 3. Notes Sizes are d x D x Dfl x e. L is the overall length, flange included. L: lengths both makers list, each its own file; the views show the middle one. C andr: SELFOIL's drawing maxima. c and rf: what's modeled, capped at wall / 4 (house).
rf = 0.375 house
c = 0.375 house, a = 45°*
TITLE
'? CommunityCAD Size drawing, 3x6x9x1.5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 2795:2020 Sintered bronze bush, flanged - 3x6x9x1.5 SHEET REV SCALE PROJECTION UNITS CC-1S02795F-SZ-3x6x9x1.5 A 10:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE
View from above 70b2bf787ea8F07904ce030afSObcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
Df:
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.