CC-1S02795F -DS-3x6x9x1.5 revA Size datasheet - 3x6x9x1.5
'?) CommunityCAD
ISO 2795 3x6x9x1.5 sintered bronze bush
Size datasheet: this bush's values with their levels, conventions and sources.
For 3 mm shafts in a 6 mm housing _ . bore EEE Part key iso2795 -f-3x6x9x1-5x<L> Pt | Files 1 STEP AP214 (simplified), one ST per length Lengths 4mm 3x6x9x1.5, front view, 4:1 3x6x9x1.5, view from above, 2.5:1 Sym. Dimensi Value Level d Inside diameter 3 L1- 2 D Outside diameter, body 6 L1- 2 DFL Flange diameter 9 La - 2 e Flange thickness 1.5 L1- 2 c Edge chamfer, maker maximum < 0.8% Lo -1 a Chamfer angle from the axis, degrees 45* lo - 1 r Flange -root fillet, maker maximum < 0.8% lo - 1 6 Modeled chamfer, min(C, wall / 4) (house) 0.375 house rf Modeled root fillet, min(r, wall / 4) (house) 0.375 house
Modeled value: nominal, else the midpoint of min-max. : only that limit is given, modeled at it. * amber: one source (LO). c: a source value was corrected. house: a stated rule. Level - independent sources.
ISO 2795:2020 Page 1/2 Sintered bronze bush - 3x6x9x1.5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 70b2bf787ea8F07904ce030af50bcaf231F0c68F
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
. CC-1S02795F -DS-3x6x9x1.5 revA '?) CommunityCAD Size datasheet - 3x6x9x1.5
Lengths
L Status Part key
4 built - - 1802795--3x6x9x1-5x4
One STEP file per length, one detail level. Listed by one source only, not generated: L = 3, 5, 6, 10.
Conventions
« Sources: ISO 2795's flanged clause isn't in its free preview. d, D, Dfl, e and the lengths are where Bowman (Oilite) and SELFOIL agree.
« Values: d, D and L at their nominals: the sources give tolerance classes (before fitting G7/G8 bore, s7/s8 outside, js13 length; H7 or H8 bore after press -fitting), not limits. The model is the nominal part before fitting, concentric.
¢ Chamfers and root fillet: A chamfer on the bore at both ends, the body's free end and the flange's rim on both faces; a fillet where the flange meets the body. SELFOIL's drawing maxima, capped at a quarter of the wall: c along the axis, c tan(a) across it. Not specified by the standard.
« Frame: Z the axis, the flange's underside at Z = 0, the flange toward +Z to Z = e and the body toward -Z. The sheets stand it on the body's free end, the flange on top.
« Grooves, holes, markings, finish: None modeled: standard parts are plain, and a press-fit part carries no CommunityCAD mark. Sintered bronze, oil impregnated: render material only.
Sources
Source Publisher Retrieved sha256
bowman-iso2795-flanged Bowman International 2026-10-30 9eF94821729d
selfoil-iso2795-flanged SELFOIL (Spain) 2026-10-30 8309193495 (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-ISO2795F-DS.
ISO 2795:2020 Page 2/2 Sintered bronze bush - 3x6x9x1.5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 70b2bf787ea8F07904ce030af50bcaf231F0c68F
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.