DIN 988 shim ring, 3x6
Size drawing - 3x6 values on the views - h = 0.5 shown (the thickest file) - enlarged 10:1
d2=
"5.91
5.85-5.97
View fro
above
Sym. Dimensi 3x6
3.07 3.02-3.12
di Bore, D12 (band middle)
5.91 5.85-5.97
Outside, d12 (band middle)
thickness, a file each e
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 2.
Notes
d1 and d2: the middle of the D12 / d12 band; grey = the band's limits (ISO 286-2).
h: nominal = max; @ = a file at that thickness. Sharp edges: house conventions, D02.
TITLE
'? CommunityCAD Size drawing, 3x6
STANDARDS FOLLOWED
FAMILY / DETAIL
DIN 988:1990-03 (as tabulated) - ISO 286-2 (D12, d12) Shim ring - 3x6
SHEET
CC-DIN988-SZ-3x6 A 10:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
091135b88172de29a46c1a2ac9916F747F26acf7 CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.