Neodymium disc magnet, diameter x height, 3x3
Size drawing - 3x3 values on the views - enlarged 8:1
Dimension
Diameter
Height, magnetised axis
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L1 2.
Notes
No published standard: values from the makers' stock lists (ADR 0034). Every edge rounded r = the smallest dimension / 10, illustrative: sheet DO2.
TITLE
'? CommunityCAD Size drawing, 3x3
STANDARDS FOLLOWED No published standard (makers' stock lists)
FAMILY / DETAIL
Neodymium disc magnet - 3x3
SHEET
CC-MAGDISC-SZ-3x3 A 8:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION 98347800d792290f 66be940Fcba34184c0811b8F CC-BY 4.0 IronPixel Labs LLC
LICENSE
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.