Neodymium disc magnet, diameter x height, 3x1
Size drawing - 3x1 values on the views - enlarged 8:1
Dimension
Diameter
Height, magnetised axis
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. @D=3 c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 2. Notes No published standard: values from the makers' stock lists (ADR 0034). Every edge rounded r = the smallest dimension / 10, illustrative: sheet DO2.
TITLE
'? CommunityCAD Size drawing, 3x1
STANDARDS FOLLOWED FAMILY / DETAIL No published standard (makers' stock lists) Neodymium disc magnet - 3x1 SHEET REV SCALE PROJECTION UNITS
CC-MAGDISC-SZ-3x1 A 8:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE 983478c0d792290F66be940Fcba34184c0811b8F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.