37d-26.5 Gearmotor, Pololu datasheet (PDF)

Datasheet — 37d-26.5 Gearmotor, Pololu by Milo

Open the PDF
37d-26.5 Gearmotor, PololuGet the CAD model37d-26.5 Gearmotor, PololuCC-GM-POLOLU-DS-37d-26-5.pdf

Text of this datasheet

CC-GM-POLOLU-DS-37d-26-5S revA Size datasheet - 37d-26.5

'?) CommunityCAD

Pololu 37D metal gearmotor, 26.5 mm gearbox

Size datasheet: this size's values with their levels, conventions and sources.

For Pololu 37D gearmotor brackets and mounts

Part keys gearmotors-pololu-37d-26-5, gearmotors-pololu-37d-26-5- enc (encoder)

Files 2 STEP AP214 (simplified): without and with the encoder

37d-26.5, gearbox face, 0.5:1 37d-26.5, side, 0.25:1 (hidden lines dashed) Sym. Dimension Value D Gearbox diameter 36.8 Lg Gearbox length 26.5 Dm Motor can diameter 34.8 Lm Motor can length 30.7 d Output shaft diameter 6 f Across the shaft's flat 5.4 E Shaft length from the face 22.0 B Front boss diameter 12.0 h Front boss height 6.0 n Number of mounting holes 6 M Mounting hole thread th Mounting hole depth 3.0 Pc Hole circle (37D) 31.0 ph Adjacent hole spacing (37D) 115} eo Shaft offset (37D) 7.0 2 Br Rear boss diameter 7.8 pe | hr Rear boss height 1.6 po ut Terminal reach past the can 5.0 pt Across the terminals 22.5 tw Terminal width 2.9 tt Terminal thickness 0.5 le Encoder cover length (-enc) 15.4 De Encoder cover diameter (-enc) 34.0

Modeled value: nominal, else the midpoint of min-max. < / Level - independent sources.

: only that limit is given. * amber: one source (LO). c: a source value was corrected.

Pololu's dimension diagrams (maker drawings), TT Motor and NFP Page 1/2 Pololu 25D and 37D gearmotor - 37d-26.5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

---

* CC-GM-POLOLU-DS-37d-26-5S revA '?) CommunityCAD Size datasheet « 37d-26.5

Conventions

¢ Pololu's drawings: No published standard: the parts are Pololu's, and Pololu's dimension diagrams are their maker drawings. TT Motor and NFP cross-check the gearbox lengths and the 37D's shaft.

« Where makers differ: The largest stated shaft length, gearbox, can, bosses, terminals and encoder cover, so a mount made to the model clears every maker's motor; each maker's value is on the page. The shaft, its flat, the threads and the hole positions stay exact.

» Gearbox and face: The gearbox's front chamfer, the 25D's two seam grooves, the 37D's arc recess round the boss, the cross-head plate screws and the boss's chamfer. Illustrative, not Pololu's design, checked for fit only.

« Holes, shaft, can and encoder: Tapped holes as plain bores at the thread's nominal diameter to Pololu's stated depth; the flat's length and the shaft's end chamfer; the can's rounded rear edge, nylon end cap, terminal holes and red polarity dot; the encoder cover's walls and header slot; the CommunityCAD mark. Illustrative.

Sources Source Publisher Retrieved sha256 pololu-37d-gearmotors Pololu 2026-11-05 0501¢7a41269 nfp-gm37-520 NFP Motor (Shenzhen) 2026-11-07 £0d85069F72e

The whole series (verification map, corrections, drawings): CC-GM-POLOLU-DS.

Pololu's dimension diagrams (maker drawings), TT Motor and NFP Page 2/2 Pololu 25D and 37D gearmotor - 37d-26.5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.