Pololu 25D and 37D metal spur gearmotor, frame and gearbox length, 37d-26.5
Size drawing - 37d-26.5 values on the views - enlarged 1.5:1
'? CommunityCAD
37d-26.5 Gearbox diameter 36.8 Gearbox length 26.5 Motor can diameter 34.8 Motor can length 30.7 Output shaft diameter Across the shaft's flat Shaft length from the face Front boss diameter Front boss height Number of mounting holes Mounting hole thread Mounting hole depth Hole circle (37D) Adjacent hole spacing (37D) Shaft offset (37D) Rear boss diameter Rear boss height Terminal reach past the can Across the terminals Terminal width Terminal thickness Encoder cover length (-enc)
Encoder cover diameter (-enc)
TITLE
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c =a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 23.
Notes
Pololu's dimension diagrams are the parts' maker drawings (ADR 0089).
Largest stated where makers differ (ADR 0136 row 4); every maker's value on the page.
Screws, seams, end cap, dot, cover and mark illustrative: sheet DO2.
Size drawing, 37d-26.5
STANDARDS FOLLOWED Pololu's dimension diagrams (maker drawings), TT Motor and NFP
FAMILY / DETAIL Pololu 25D and 37D gearmotor - 37d-26.5
SHEET
REV SCALE PROJECTION UNITS
CC-GM-POLOLU-SZ-37d-26.5 A 1.5:1
Dimensions in mm
SPEC VERSION
c5fa7152767e6d6286420b3e684bféabd9e752c5
LICENSE
CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.