37d-26.5-ENC Gearmotor, Pololu, With Encoder size drawing (PDF)

Datasheet — 37d-26.5-ENC Gearmotor, Pololu, With Encoder by Milo

Open the PDF
37d-26.5-ENC Gearmotor, Pololu, With EncoderGet the CAD model37d-26.5-ENC Gearmotor, Pololu, With EncoderCC-GM-POLOLU-SZ-37d-26.5.pdf

Text of this datasheet

Pololu 25D and 37D metal spur gearmotor, frame and gearbox length, 37d-26.5

Size drawing - 37d-26.5 values on the views - enlarged 1.5:1

'? CommunityCAD

37d-26.5 Gearbox diameter 36.8 Gearbox length 26.5 Motor can diameter 34.8 Motor can length 30.7 Output shaft diameter Across the shaft's flat Shaft length from the face Front boss diameter Front boss height Number of mounting holes Mounting hole thread Mounting hole depth Hole circle (37D) Adjacent hole spacing (37D) Shaft offset (37D) Rear boss diameter Rear boss height Terminal reach past the can Across the terminals Terminal width Terminal thickness Encoder cover length (-enc)

Encoder cover diameter (-enc)

TITLE

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing).

L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c =a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule.

This size's values: L2 23.

Notes

Pololu's dimension diagrams are the parts' maker drawings (ADR 0089).

Largest stated where makers differ (ADR 0136 row 4); every maker's value on the page.

Screws, seams, end cap, dot, cover and mark illustrative: sheet DO2.

Size drawing, 37d-26.5

STANDARDS FOLLOWED Pololu's dimension diagrams (maker drawings), TT Motor and NFP

FAMILY / DETAIL Pololu 25D and 37D gearmotor - 37d-26.5

SHEET

REV SCALE PROJECTION UNITS

CC-GM-POLOLU-SZ-37d-26.5 A 1.5:1

Dimensions in mm

SPEC VERSION

3¢4229b833a653b73db51178a38d40486ee7c36b

LICENSE

CC-BY 4.0 IronPixel Labs LLC

PAGE

1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.