36t-5 Timing Pulley (Timing Belt Pulley), GT2 pulley

Over its flanges the 36t-5 timing pulley (GT2 pulley) is 28.067 mm across and over its 36 teeth 22.41 mm; the 5 mm bore is held by M3 set screws in a hub 17.1704 mm across, 18 mm long overall. Download it as simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: 36t-5 pulley
• Model id: gt2-pulleys-36t-5
• Standard: GT2 pulley · size 36t-5

Files

Part key	Simplified
gt2-pulleys-36t-5	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
dp	Pitch diameter		22.92		22.92	nominal	L1
da	Outside diameter		22.41		22.41	nominal	L1
df	Flange diameter		28.067		28.067	nominal	L1
b	Face width between the flanges		7.366		7.366	nominal	L1
bf	Width over the flanges		10.3		10.3	nominal	L0 (nom: one source)
L	Overall length		18		18	nominal	L1
dh	Hub diameter		17.1704		17.1704	nominal	L1
lh	Hub length		7.5692		7.5692	nominal	L0 (nom: one source)
de	Face diameter inside the flanges		18		18	nominal	L0 (nom: one source)
ds	Set screw thread		3		3	nominal	L1

Drawing

As a PDF: CC-GT2-SZ-36t-5.pdf.

The 36t-5 timing pulley beside the 20t-5 and the 36t-8

The 36t-5 is number 3 of the 7 GT2 pulley timing pulleys published here, listed from 16t-5 to 60t-8.

• Pitch diameter (dp): 22.92 mm on the 36t-5 timing pulley, against 12.73 mm on the 20t-5 and 22.92 mm on the 36t-8.
• Outside diameter (da): 22.41 mm on the 36t-5 timing pulley, against 12.22 mm on the 20t-5 and 22.41 mm on the 36t-8.
• Flange diameter (df): 28.067 mm on the 36t-5 timing pulley, against 17.399 mm on the 20t-5 and 28.067 mm on the 36t-8.
• Face width between the flanges (b): 7.366 mm on the 36t-5 timing pulley, the same on the 20t-5 and the 36t-8.
• Width over the flanges (bf): 10.3 mm on the 36t-5 timing pulley, the same on the 20t-5 and the 36t-8.
• Overall length (L): 18 mm on the 36t-5 timing pulley, against 15.875 mm on the 20t-5 and 18 mm on the 36t-8.
• Hub diameter (dh): 17.1704 mm on the 36t-5 timing pulley, against 9.2456 mm on the 20t-5 and 17.1704 mm on the 36t-8.
• Hub length (lh): 7.5692 mm on the 36t-5 timing pulley, against 5.9944 mm on the 20t-5 and 7.5692 mm on the 36t-8.

Other sizes

• One size smaller: 20t-5 Timing Pulley (Timing Belt Pulley), GT2 pulley, 20 teeth, 5 mm bore, pitch diameter 12.73 mm, M3 set screws.
• One size larger: 36t-8 Timing Pulley (Timing Belt Pulley), GT2 pulley, 36 teeth, 8 mm bore, pitch diameter 22.92 mm, M4 set screws.

Documents

• CC-GT2-DS-36t-5.pdf: 36t-5 datasheet: values with levels, sources
• CC-GT2-SZ-36t-5.pdf: 36t-5 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

gates-light-power-precision, misumi-gpa-2gt, sdpsi-gt2-molded-6mm. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.