ISO 355 single row tapered roller bearing, 32008X
Size drawing - 32008X values on the views - scale 1:1
Bearing
32008X 14.5 (54.7 refx | 14.21%
Source levels Main value = the modeled value (nominal, else the middle of min-max). a = 14.21°* Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. D=68 L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L18 - LO 2. Notes 211, r3: the sources give r_s min only; modeled at that limit. d1 (=, one source) and a (from Y by a cited rule) are LO: amber. The cup wall, ribs, raceway and corners are house conventions, sheet DO2.
d1 = 54.7 ref*
D=68
View from above
TITLE
'? CommunityCAD Size drawing, 32008X
STANDARDS FOLLOWED FAMILY / DETAIL ISO 355 (edition not printed by the sources) Tapered roller bearing - 32008X SHEET REV SCALE PROJECTION UNITS
CC-1S0355-SZ-32008X A 1:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.