ISO 355 single row tapered roller bearing, 32004X
Size drawing - 32004X values on the views - enlarged 2:1
a = 14.04°* D=42 \
d1 = 32.1 ref*
D=42
View from above
Bearing
32004X 12 (32.1 refx | 14.04%
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L18 - LO 2.
Notes
211, r3: the sources give r_s min only; modeled at that limit.
d1 (=, one source) and a (from Y by a cited rule) are LO: amber.
The cup wall, ribs, raceway and corners are house conventions, sheet DO2.
TITLE
'? CommunityCAD Size drawing, 32004X
STANDARDS FOLLOWED
ISO 355 (edition not printed by the sources)
FAMILY / DETAIL
Tapered roller bearing - 32004X
SHEET
CC-1S0355-SZ-32004X A 2:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.