3.2 mm E-clip, DIN 6799
For shafts of 4 to 5 mm grooved to 3.2 mm: the E-clip (DIN 6799), 0.6 mm thick, with an installed outer diameter up to 7.3 mm. Download it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 3.2 mm E-ring, 3.2 mm retaining washer, 3.2 mm E-type retaining ring
- Model id:
din6799-d3-2
- Standard: DIN 6799:2017 · size 3.2 mm
Files
| Part key | Simplified |
|---|
din6799-d3-2 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| s | Clip thickness | | 0.6 | | 0.6 | nominal | L1 |
| s_lim | Clip thickness, limits | 0.58 | | 0.62 | 0.6 | midpoint of min–max | L0 (min, max: one source) |
| a | Mouth width | | 2.7 | | 2.7 | nominal | L1 |
| a_lim | Mouth width, limits | 2.66 | | 2.74 | 2.7 | midpoint of min–max | L0 (min, max: one source) |
| d3 | Outer diameter, installed | | | 7.3 | 7.3 | single limit (max), modeled at the limit | L1 |
| d2 | Groove diameter | | 3.2 | | 3.2 | nominal | L1 |
| d1 | Shaft diameter range | 4 | | 5 | 4.5 | midpoint of min–max | L1 |
| m | Groove width | | 0.64 | | 0.64 | nominal | L1 |
| n | Groove edge margin | 1 | | | 1 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-DIN6799-SZ-3.2.pdf.
The 3.2 mm E-clip beside the 2.3 mm and the 4 mm
The 3.2 mm is number 2, counting from the smallest, of the 11 DIN 6799 E-clips published here, from 2.3 mm to 15 mm.
- Clip thickness (s): 0.6 mm on the 3.2 mm E-clip, against 0.6 mm on the 2.3 mm and 0.7 mm on the 4 mm.
- Clip thickness, limits (s_lim): 0.58 to 0.62 mm on the 3.2 mm E-clip, against 0.58 to 0.62 mm on the 2.3 mm and 0.68 to 0.72 mm on the 4 mm.
- Mouth width (a): 2.7 mm on the 3.2 mm E-clip, against 1.94 mm on the 2.3 mm and 3.34 mm on the 4 mm.
- Mouth width, limits (a_lim): 2.66 to 2.74 mm on the 3.2 mm E-clip, against 1.9 to 1.98 mm on the 2.3 mm and 3.292 to 3.388 mm on the 4 mm.
- Outer diameter, installed (d3): up to 7.3 mm on the 3.2 mm E-clip, against up to 6.3 mm on the 2.3 mm and up to 9.3 mm on the 4 mm.
- Groove diameter (d2): 3.2 mm on the 3.2 mm E-clip, against 2.3 mm on the 2.3 mm and 4 mm on the 4 mm.
- Shaft diameter range (d1): 4 to 5 mm on the 3.2 mm E-clip, against 3 to 4 mm on the 2.3 mm and 5 to 7 mm on the 4 mm.
- Groove width (m): 0.64 mm on the 3.2 mm E-clip, against 0.64 mm on the 2.3 mm and 0.74 mm on the 4 mm.
Other sizes
Conventions
- Simplified only: an E-clip has no thread, so there is one detail level. STEP AP214, millimetres, Z along the shaft axis, one face at Z = 0, the mouth on +X.
- Modeled installed on the shaft: the lug tips on the groove diameter d2 (nominal), the outer diameter d3 at its max (a single limit); thickness s at its nominal.
Documents
Sources
fasten-it-din6799, fasteners-eu-din6799, kipp-k1940. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...