ISO 355 single row tapered roller bearing, 30207
Size drawing - 30207 values on the views - scale 1:1
Bearing
30207 15 (51.9 refx | 14.04%
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
a = 14.04°* \ =“ < / = = the source gives only that limit, modeled at it. ref = reference. D=72 L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. Cc=15 T=18.25c House convention = a detail no source dimensions, drawn to a stated house rule. . This size's values: L18 - LO 2. Notes 211, r3: the sources give r_s min only; modeled at that limit. d1 (=, one source) and a (from Y by a cited rule) are LO: amber. . The cup wall, ribs, raceway and corners are house conventions, sheet DO2. d1 = 51.9 ref*
D=72
View from above
TITLE
'? CommunityCAD Size drawing, 30207
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 355 (edition not printed by the sources) Tapered roller bearing - 30207
SHEET REV SCALE PROJECTION UNITS
CC-1S0355-SZ-30207 A 1:1 € Dimensions in mm SPEC VERSION LICENSE PAGE
c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.