CC-TNUTR-DS-b8-M4 revA Size datasheet - b8-M4
'?) CommunityCAD
30 B-type slot 8 M4 roll-in spring T-slot nut
Size datasheet: this size's values with their levels, conventions and sources.
For 30 B-type slot 8 aluminium Oo extrusions Part key slot-nuts-roll-in-b8-m4 O t | Files 2 STEP AP214 (simplified, 4 threaded) b8-M4, top, 1:1 b8-M4, end, 2.5:1 (hidden lines dashed) Sym. Dimension Value Level Ww Body width across the slot 11.5 L1 - 2 L Body length along the slot 17* Lo - 1 b Neck width 7.8 La - 2 h Overall height 6.8 La - 2 k Body height 6.3% Lo - 1 n Neck height 0.5 La - 2 e Thread position from the near end 6x lo -1
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
No published standard (makers' drawings) Page 1/2 Roll-in spring T-slot nut - b8-M4 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
'?) CommunityCAD
CC-TNUTR-DS-b8-M4 revA Size datasheet - b8-M4
Conventions
e Flank and ball: The circular flank, and a chrome ball half the neck wide, standing proud of the bottom face by a tenth of the neck, in a blind hole between the thread and the far end. The spring isn't modeled. All illustrative, not any maker's dimensions.
« Values: No published standard: each value the reference maker's drawing (Misumi). A second maker's value counts as agreeing where the slot leaves room for the difference, computed from the profile's data, and a size where a value stands on one maker is labelled single source.
¢ Fit: A nut is checked against its slot system's one-cell profile, never fitted to it: neck no wider than the opening, width no wider than the
undercut, body no taller than the cavity.
« Finish: Brushed stainless: render and metadata only. No markings, no serrations, other edges sharp. Bottom face at Z = 0, the neck toward
+Z. Sources Source Publisher Retrieved misumi-roll-in-nuts MISUMI 2026-11-02 fath-roll-in-nuts FATH 2026-11-03 pule-fath-roll-in-nut-heights CommunityCAD 2026-11-03 pule-misumi-roll-in-nut-neck CommunityCAD 2026-11-03
The whole series (verification map, corrections, drawings): CC-TNUTR-DS.
No published standard (makers' drawings) Roll-in spring T-slot nut - b8-M4 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC
sha256
4be34af734a5 (kept outside the repo) 402664Fa2509 (kept outside the repo) 41c9591e50de 3ad399db61b4
Page 2/2 spec 3c4229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
