. CC-JOINPLATE-DS-b8-1-4 revA '?) CommunityCAD Size datasheet - b8-I-4
30 B-type slot 8 L plate, 4 holes (extrusion joining plate)
Size datasheet: this size's values with their levels, conventions and sources.
For joining 30 B-type slot 8 extrusions oO a | Part key extrusion-joining-plates-b8-|-4 Files 1 STEP AP214 (simplified)
b8-I-4, outer face, 0.5:1 b8-I-4, edge, 0.5:1 (hidden lines dashed)
Sym. Dimension Value Level 1 Length 85* Lo -1 w Leg width 28x lo -1 t Thickness 3.2% lo -1 d Hole diameter 6.6* lo: 1 n Number of holes Gx lo: 1 p Hole spacing 28x lo-1 e Hole to end 10* Lo -1 g Hole to outer edge 14% lo -1 c Corner chamfer Sx lo -1
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
No published standard (makers' drawings) Page 1/2 Extrusion joining plate - b8-I-4 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-JOINPLATE-DS-b8-1-4 revA Size datasheet - b8-I-4
'?) CommunityCAD
Conventions
« House mark: The CommunityCAD mark recessed 0.3 mm into the outer face on its largest hole-free square (an L or T plate's corner, an inline plate's middle), clear of every hole and edge by one plate thickness; illustrative.
« Edges: Radius r at an inline plate's four corners and the 45° chamfer c at the outside corners Misumi chamfers, as drawn; every other edge sharp, including the hole edges and the inside corners. No countersinks, no markings.
e Values: No published standard: every plate is its reference maker's own design (Misumi HPT for B-type slot 6 and 8 and slot 10, OpenBuilds for V-slot), placed as its drawing places it; single source (LO, amber) unless a second maker states the same value. Hole positions, width and hole size are checked against the profile.
e Material: Each plate in its reference part's material, render and metadata only: Misumi's chromate-plated steel, OpenBuilds' anodised aluminium.
Sources Source Publisher Retrieved sha256 misumi-sheet-metal-plates MISUMI 2026-10-29 b16155d57c00 (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-JOINPLATE-DS.
No published standard (makers' drawings) Page 2/2 Extrusion joining plate - b8-I-4 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
